Performance & Application  
 

 

 Technical Parameters 
 

MODEL ITEM	Model	DC- YL28P	DC- YL35P	DC- YL55P	DC- YL83P	DC- YL135P	DC- YL210P-D	DC- YL270P-D	DC- YL405P-T	DC- YL540P-F
HorsePower	HP	1	1.5	2	3	5	8	10	15	20
Cooling Capacity	kcal/h	2390	3061	4730	7086	11610	18060	23220	35260	46440
Cooling Capacity	KW	2.78	3.56	5.5	8.24	13.5	21	27	41	54
Total Input Power	KW	1.7	2.1	2.6	4.2	6.5	12.1	14.1	20.5	24.8
Compressor Power	KW	0.8	1.2	1.6	2.5	4	3*2	4*2	4*3	4*4
Temperature Range	℃	10-50℃，Desired Temperature of Hydraulic Oil：30-40℃
Power Supply	Power	380V/50Hz
Oil Pump Flow	L/min	20	25	25	32	50	80	100	150	200
Inlet/Outlet Pipe Caliber	Inch	1/2	1/2	3/4	1	1 1/2	1 1/2	2	2-1/2	2-1/2
Refrigerant		R22 ( Optional Environmental Refrigerant R407、R410)
Condenser		Air cooled condenser（copper tubing and corrugated aluminum fin, to improve the cooling efficiency20% ）
Evaporator		Stainless steel 316 plate heat exchanger/ shell and tuge exchanger
Fan		Large-flow and Low-Noise Axial Fan Motor
Dimensions	Length	585	605	605	685	886	1206	1306	1606	1806
	Wi mm m dth m	525	535	555	685	766	656	656	956	1106
	Height mm	962	962	1080	1142	1350	1550	1650	1860	2080
Safety protection		Delayed,over current,compressor over temperature,high and low pressure,over flow switch, phase sequence,phase-missing,exhaust overheating,antifreezing.

 Technical Specifications: 
 

1. Model number specification:e.g. HN-YL210P-D, “HN” indicates company code, “YL” indicates oil chiller, “210” indicates refrigerating capacity 210KW, “P” indicates built-in pump, “D” indicates dual system ( two compressors), “T” indicates three compressors, “F” indicates four compressors.
2. * Compressor Power: *2 indicates two compressors working and two separate cooling system.
3. Nominal cooling capacity calculated according to:Ambient temperature: 35℃. Oil inlet flow temperature: 35℃. Oil outlet flow temperature: 30℃. Oils: ISO Vg46.
4. The oil suction inlet must be connected with rigid tube, and it's necessary to install filter. Meanwhile, it's prohibited to install valve on the oil outlet.
5. The length of oil suction tube should not be more than 1.5meters; Otherwise, the diameter of oil suction inlet must be increased.
6. Working range: Oil temperature ranges from 15℃ to 50℃. Temperature difference between inlet and outlet oil is from 3℃ to 8℃. It is better to run the oil chiller while the ambient temperature at or below 42℃; Otherwise it's necessary to use high temperature models.
7. We reserve the right to revise the above information without prior notice.